Send Enquiry

Shree E-Plast+ (FC) M60+

High Strength, Hydrophobic, Non Shrink, Polymer Modified Cement Base Materials For Levelling Internal,
External Uneven surfaces of the walls, R.C.C Shear Walls /Surfaces, R.C.C. Lift Well walls, Retaining Walls, Repairing, Tie Rod Holes,
Tie rod Patti in R.C.C Members, to rectify Honeycomb surfaces in R.C. C, Structural Members, Conduit Slots, Pinholes in RCC.

Shree E-Plast+ (FC) M60+

Compressive Strength (@28days)

> 60 N/ Mm2

Package

40 Kg/Bag

Colour

Grey

Shelf Life

Water powder ratio (For Mixing purpose)

Shree E-Plast+ (FC) M60+ is a high-quality polymer-modified ready-mix finishing coat that is specially designed for Mivan and RCC surfaces. It is a thin ready-mix coat that is ideal for achieving a smooth, even surface on walls and ceilings. This versatile product is easy to apply and provides excellent adhesion, durability, and water resistance. With E-Plast+ (FC) M60+, you can achieve a perfect finish on your Mivan or RCC surfaces.

Shree E-Plast+ (FC) M60+ is another high-quality product from Shree Premix Industries (SPI). This product is a polymer-modified ready-mix mortar that is designed specifically for Tie Rod and Tie Patti filling in RCC structural members. It is easy to use and provides excellent bonding, strength, and durability. With Shree E-Plast+ (FC) M60+, you can ensure that your RCC structural members are strong and secure.

If you are looking for a readymix mortar for repairing honeycomb and uneven surfaces in RCC walls, then look no further than Shree Premix Industries (SPI). Our readymix mortar for honeycomb and uneven surface repair is a high-quality product that is designed to provide excellent adhesion and strength. With this product, you can quickly and easily repair any honeycomb or uneven surface in your RCC walls.

Shree Premix Industries (SPI) also offers a readymix non-shrink grout that is perfect for filling gaps between structural members. This product is designed to provide excellent bonding and strength and it easy to use. Whether you are working on a large-scale construction project or a small repair job, our readymix non-shrink grout is the perfect solution for filling gaps between structural members.

If you are dealing with a damaged structure, then our damage structure repairing mortar is the ideal solution. This high-quality product is designed to provide excellent bonding and strength and is easy to use. With our damage structure repairing mortar, you can quickly and easily repair any damage to your structures and ensure their long-term durability.

For those looking for a readymix mortar for filling gaps between precast members, Shree Premix Industries (SPI) has the perfect product. Our readymix mortar for filling gaps between precast members is designed to provide excellent bonding and strength and is easy to use. With this product, you can quickly and easily fill any gaps between your precast members and ensure their long-term durability.

If you need a readymix material for honeycomb repairing, Shree Premix Industries (SPI) has the perfect solution. Our readymix material for honeycomb repairing is a high-quality product that is designed to provide excellent bonding and strength. With this product, you can quickly and easily repair any honeycomb in your structures and ensure their long-term durability.

For those dealing with the repair of an RCC water tank, our readymix repairing material for RCC water tank is the perfect solution. This high-quality product is designed to provide excellent bonding and strength and is easy to use. With our readymix repairing material for RCC water tank, you can quickly and easily repair any damage to your water tank and ensure its long-term durability.

Shree Premix Industries (SPI) is a leading manufacturer and supplier of high-quality readymix materials. Our products are designed to provide excellent bonding, strength, and durability, and are easy to use. Whether you are working on a large-scale construction project or a small repair job, our products are the perfect solution. Contact us today to learn more about our products and how we can help you with your construction needs.

Description

High Strength, Hydrophobic Property, Preblended, Single component polymer modified, Cement Base, Muiltipurpose ready to use material for Levelling / Finishing the Damaged R C C , A.A.C surfaces , Repairing various types of substrate, Repairing Tie Rod Holes, Tie Rod Patti, Honeycomb Surfaces, Slots, Pin Holes, Corner/ Edges Damages of Structural Members, Footing & other substrates

BIS Reference : IS 2402 - 1963 ( Reaffirmed 2001): Code of Practice for External Rendered Finishes shall be followed for Specifications , Number of Coats, thickness of Plaster & other.

AREA OF APPLICATIONS

For Levelling, Finishing, honeycomb surfaces of Mivan /AL Shuttering Surfaces, Repairing External /Internal A.A.C. block Surface, R.C.C surface, Columns, Beams, Ceiling, Chajjas& Tunnels, Basements retaining walls, R.C.C tanks, various types of Structural Members, filling the Tie rod holes/ Tie patti holes in RCC Members & for repairing efflorescence in all types of Buildings/ infra projects All types of above application in residentials/ commercial/ Institutional/ Hotels/ Hospitals/ Infra Projects/ Heritage Buildings/ Goverment Projects/ PMAY Projects/ Mass HOusing Projects/ MHADA/ CIDCO/ Mass Housing Projects/ Redevelopment Projects/ CPWD/ PWD/ Metro/ MOnorail/ Railways Projects

Repairing honeyComb R.C.C. Surface

Repairing honey Comb in R.C.C. Surface

Filling Tie Patti Holes

Filling Wall Tie Patti Holes

Levelling & Finishing of Ceiling

Levelling & Finishing of Ceiling

Repairing of uneven bottom surface of overhead R.C.C. Water Tank.

Repairing of uneven bottom surface of overhead R.C.C. Water Tank.

Advantages
Technical Details
Applications
How to Use
Enquiry

Advantages

"Shree E Plast +(FC) (M60+)" Special Properties Single product developed for multipurpose/ Multi locations applications.

"Shree E Plast +(FC) (M60+)" having higher Compressive Strength than any other finishing material available.

"Shree E Plast +(FC) (M60+)" having Non-Shrinkage Property hence it avoids the formation of Cracks.

"Shree E Plast + (FC) (M60+)" having Hydrophobic Property hence it avoids water penetration through the finishing material it gains the property of waterproofing.

In "Shree E Plast +(FC) (M60+)" We need to add only water at site as per Water Powder ratio hence it's easy to Mix and use, Quality can be control easily from any location by any one by following WP ratio.

Application of "Shree E Plast +(FC) (M60+)" For Finishing & levelling surfaces of A.A.C./ Concrete blocks, R.C.C, Ceiling, Mivan shuttering damage Surfaces, Basement retaining walls surfaces it can be done in minimum thickness as well as it can be applied Easily, Speedily, smoothly hence it Saves lot of time, material &Cost of the project compare to use of other material.

"Shree E Plast +(FC) (M60+)" can be use in Minimum thickness for levelling the uneven R.C.C surfaces, for Repairing rough, damaged, Honeycomb, Corner, edges damage R.C.C Surfaces, alignment of column, Beam, Chaijja, Filling Tie rod holes, Tie rod Patti holes, Pin holes as well as multipurpose applications.

During the application of "Shree E Plast+ (FC) (M60+)" No wastage of material, it saves the cost of project.

"Shree E Plast+(FC) (M60+)" can be applied on any smooth Surface without hacking and without using bonding agent.

Use of "Shree E Plast+(FC) (M60+)" for finishing work saves the material, water required for mixing and Curing as well as it saves lot of natural resources hence its Eco friendly & Green Building Material.

Pot life of "Shree E Plast+(FC) (M60+)" is more hence mixed material we can be used for finishing work for long time hence it avoids the wastage.

"Shree E Plast+(FC) (M60+)" Contains special grades of Fillers which are free from dust, Silt, Mud hence no formation of the cracks to the finishing material, no effect on Quality & Strength.

Finishing with "Shree E Plast+(FC) (M60+)" in minimum thickness will reduce the Cost, Dead weight on the walls, Structures & increase the carpet area compare to convential method/ Other Plasters in case of internal walls.

Any type of Tiles, Stone, Marble, Granites, Italian Marbles, Glass mosaic can be fixed with "Shree E Tile Bond++" on surface finished with "Shree E Plast+(FC) (M60+)".

Use of "Shree E-Plast+(FC) (M60+)" skip the use of putty on external surface for levelling and finshing on R.C.C surface brfore painting, directly paint can be applied on the surfae finshed with "Shree E -Plast+(FC) (M60+)".

Use of "Shree E-Plast (FC) (M60+)" to repair efflorescence save the cost of additional levelling, water proofing as well as other finishing material.

In case of use of "Shree E-Plast+(FC) (M60+)" in colour on external RCC surface it can skip all expenses required for surface preperation, water proffing and painting.

Applications

Technical details

To Know More About Technical Specification In Detail

Download Catalouge

How To Use

Surface Cleaning/ Preparation

Before application of "Shree E Plast+(FC) (M60+)", Surface shall be inspected, In case of uneven surface, clean the surface with wire brush or grind the uneven surface of R.C.C by grinder to match the level (as per site requirement) as well as to minimize the use of "Shree E Plast+(FC) (M60+)" to match the level, Remove the dust particles, Clean the surface with the help of blower, remove all, loose materials, If plenty of water are available then use water by pressure to clean and wash the surfaces, or moisten the surface before application of "Shree E Plast+(FC) (M60+)".

Filling Tie rod Holes/Patti/ Honeycomb Surface

Clean the Tie holes /Patti hole with blower, remove inside dust, Clean surfaces of tie rod hole/ Patti with wire Brush, remove dust particles, clean with water, In case of honey comb surface remove dust, loose particles of concrete, clean the substrate, clean with water before application of "Shree E Plast+ (FC) (M60+)" Mix "Shree E Plast”+(FC) (M60+)" as per water powder ratio given as below/ as per purpose of application as per site Conditions, as per sampling done at site with WP ratio for the particular purpose and application, It shall be done in consultation with Shree Premix Industries (SPI) sampling and training team.

Mixing & Application

Add 1 Kg "Shree E Plast+(FC) (M60+)" powder in 160 to 180 ML clean water, Mix the material with mechanical mixer for 3 to 5 minutes or In case of manual mixing Add 1 Kg "Shree E Plast+(FC) (M60+)" powder in 170 to 190 ML clean water, mixed material for 8 to 10 minutes till we get the uniform, homogenous mix with uniform consistency for easy & Smooth application, Leave the mix remain idle for 3 to 5 minutes to dissolve the Polymers, adhesives, Fibers to gain the special properties, remix the mixed material for 2 to 3 minutes, start application on the A.A.C / R.C.C surface/ Mivan Shuttering surface by using proper tools till we get level, uniform & smooth surface, as required to us or sand face / decorate finish can be created by using appropriate tools. In caseof filling tierod holes / Finishing Honeycomb surface, same material shall be mixed & used as per required WP ratio shown at site by SPI team /Sampling done as per site conditions orWP suggested by SPI team in Sampling report sent to the client, Proper tools andtackles shall be used for filling and pushing material to enable to get smooth and void free surfaces. In case of normal weather condition, Curing shall be done twice in a day after 12 hours at least 2 to 3 days. In case of extreme hot weather curing shall be done for 5 to 6 days. Qty of Shree E Plast+(FC)(M60+) shall be mixed in such way that it shall be consumed within 1 to 2 hours from the time of mixing. Special Note: We have developed Special properties in Shree E Plast (FC) M60+ by using Special types of Chemicals due to which in our regular R& D it proves that Without curing also (Air Curing) “Shree E Plast+(FC) M 60+ “achieves the almost similar Compressive Strength as required as per grade of the material ,but as per general Civil Engineering Construction practices at site @ Curing , we have recommend curing as per site & climatic conditions in our TDS.

Handling and Mixing

In case of manual mixing hand gloves shall be used.

Safety Precautions

Shree E-Plast+ (FC) M60+ contains non-toxic materials. In case of contact with body, eye & face wash it with sufficient water

Unloading and Storage

Do Not Use Hook

Do not use hook for unloading, shifting of bags, material

Loaded Above Ground Level

It shall be unloaded on uniform level platform surface above ground level with proper stacking in countable manner

Store In Dry Place

It should be stored in covered dry place.In case of rainy season it shall be stored in closed store room by covering it by tarpaulin / polythene sheet to protect the bags from dampness / humidity in the atmosphere.